Description

Overview:
Blueprints BP327CTFKV GM Small Block Compatible performance crate engines are dyno tested at our factory with a Holley Sniper II EFI System. This produces 350 horsepower and 350 ft. lbs. torque. This engine comes as a deluxe dressed engine that comes with: Premium Vintage Valve Covers, Premium Vintage Air Cleaner as well as the Fuel Pump and Feed lines. Makes this engine a great drop in for performance. Comes with a Polished Pulley Kit.

Description:
Horsepower & Torque: 350 Horsepower / 350 FT. LBS. Torque
Compression Ratio: 9.4:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Hypereutectic Pistons
Block:
Kezar’s Perfomance High Strength Cast Iron Block
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech Fuel Pump Provision: Yes
Passenger Side Dipstick
Drilled and Tapped for Clutch Linkage
Rotating Assembly:
New BluePrint Forged Crankshaft
3.250″ Stroke
Forged 5.700″ Connecting Rods w/ 150,000 PSI Bolts
Hypereutectic Pistons
Internally Balanced Front – Externally Balanced Rear
Cylinder Heads:
BluePrint Aluminum Cylinder Heads – H8002K
64cc Chamber
2.02″ Intake / 1.60″ Exhaust Valves
195cc Intake / 75cc Exhaust Runners
Cam Specs:
Cam Type: Roller
.495 Intake / .502 Exhaust Lift
220 Intake / 224 Exhaust Duration
@ .050-114 Degree Lobe Separation
Ignition Timing:
32-34 Degrees Total at 3500 RPM
Also Includes:
Holley Sniper 2 EFI System
Premium Vintage Valve Covers
Premium Vintage Air Cleaner
6.75-inch Harmonic Balancer
Spark Plugs
Under Header Spark Plug Wires (Perfect for Rams Horn exhaust manifolds)
Fuel Pump and Feed Line
Rear Sump Oil Pan
Timing Cover
Aluminum Intake Manifold
Pro Billet Distributor
Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
Thermostat and Thermostat Housing