Description

Overview:
Blueprints BP327CTCV GM Small Block Compatible performance crate engines are dyno tested at our factory with a Holley Brawler 670cfm Vacuum Secondary Carburetor w/ Electric Choke. This produces 350 horsepower and 350 ft. lbs. torque. This engine comes as a deluxe dressed engine that comes with: Premium Vintage Valve Covers, Premium Vintage Air Cleaner as well as the Fuel Pump and Feed lines. Makes this engine a great drop in for performance.

Description:
Horsepower and Torque: 350 Horsepower / 350 FT. LBS. Torque
Compression Ratio: 9.4:1
Aluminum Heads
Forged Crank
Hydraulic Roller Cam
Hypereutectic Pistons
Block:
Kezar’s Perfomance High Strength Cast Iron Block
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Passenger Side Dipstick
Mechanical Fuel Pump Provision: Yes
Drilled and Tapped for Clutch Linkage
Rotating Assembly:
New BluePrint Forged Crankshaft
3.250″ Stroke
Hypereutectic Pistons
Forged 5.700″ Connecting Rods w/ 150,000 PSI Bolts
Internally Balanced Front – Externally Balanced Rear
Cylinder Heads:
BluePrint Aluminum Cylinder Heads – H8002K
64cc Chamber
2.02″ Intake / 1.60″ Exhaust Valves
195cc Intake / 75cc Exhaust Runners
Cam Specs:
Hydraulic Roller
.495 Intake / .502 Exhaust Lift
220 Intake / 224 Exhaust Duration
@ .050-114 Degree Lobe Separation
Ignition Timing:
32 – 34 Degrees Total at 3500 RPM
Also Includes:
Holley Brawler 670cfm Vacuum Secondary Carburetor w/ Electric Choke
Under Header Spark Plug Wires (Perfect for Rams Horn exhaust manifolds)
Small Cap Ready to Run Distributor Equipped with Tach Drive and Coil
Premium Vintage Valve Covers
Premium Vintage Air Cleaner
6.75-inch Harmonic Balancer
Spark Plugs
Fuel Pump and Feed Line
Rear Sump Oil Pan
Timing Cover
Aluminum Intake Manifold
Thermostat and Thermostat Housing