LS Classic Series GMLS4002 LS Plug Wire And Dummy Distributor Set

WAHAT AL ZAFRAN AUTO SPARE PARTS LLC  »  »  LS Classic Series GMLS4002 LS Plug Wire And Dummy Distributor Set
LS Classic Series GMLS4002 LS Plug Wire And Dummy Distributor Set
LS Classic Series GMLS4002 LS Plug Wire And Dummy Distributor Set - Image 2

LS Classic Series GMLS4002 LS Plug Wire And Dummy Distributor Set

724.95 د.إ

GMLS4002 LS Distributor kit with plug wires all LS

  • Cast aluminum hollow distributor body acts as a “pass through” for spark plug wires
  • Kit includes distributor housing and vintage cap, fasteners, and high quality, American made plug wire set
  • Plug wires are designed for coil relocation, 9’ long. Wires are black 7 mm Kevlar spiral core with 40 ohms of resistance per foot with high-temp silicone boots. Kit includes straight, unterminated spark plug boots (Installation requires wire crimping tool), 90 degree distributor cap boots, and 90 degree crimped coil boots.
  • Distributor is designed to bolt to the back two bolts of LS Classic valley pans
  • Patent pending
  • Made in the U.S.A.

SKU: 491GMLS4002 Categories: ,

Description

LS Classic GMLS4002 Details

If you want to top off your vintage appearing LS swap then look no further than the LS Classic Series distributor and plug wire set. We start with a set of high quality, 7 mm, Kevlar spiral core spark plug wires with high-temp silicone boots. The wires are 9’ long with 40 ohms of resistance per foot, giving you all the length and performance you need to remote mount your coils, out of sight and out of mind.
The plug wires first connect to the coils and then pass through the hollow cast aluminum distributor body that is bolted to the engine’s valley plate, and then on to the spark plugs for an authentic nostalgic look.

The LS Classic Distributor kit includes the plug wires with pre-installed 90 degree coil boots, straight unterminated spark plug boots (plug wire crimpers are needed to complete the installation), 90 degree distributor boots, distributor housing, cap, and terminals. The distributor is designed to bolt to the back two bolts of LS Classic valley pans (will NOT clear valley plates with raised ribs or oil pressure sender boss). NOTE: Check firewall clearance to insure fit.

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

LS Classic GMLS4002 Specifications

KEY SPECS
MFG. Part # GMLS4002
Brand LS Classic
Finish Black
Color Black
GENERAL
Wire Diameter 7 mm
Sold in Quantity Kit
GTIN Code 847087045049

Reviews

There are no reviews yet.

Be the first to review “LS Classic Series GMLS4002 LS Plug Wire And Dummy Distributor Set”

Your email address will not be published. Required fields are marked *

Related products